Products / MSA & GM - The Safety Company
Socrate has chosen MSA & GM as its partner for their renowned global leadership in the manufacture and supply of high-quality safety products.
Founded in 1914, MSA & GM are committed to the health of people around the world. Their products integrate advanced technologies to protect users from dangerous or potentially lethal situations. Used in a wide range of industries, including oil, gas, and petrochemical, firefighting, construction, mining, and military, MSA & GM products offer reliable, high-level protection.
With a comprehensive range of products, MSA & GM fixed gas and flame detection systems guarantee safety and peace of mind for anyone who relies on Socrate.
Contact us if you are interested in this brand
If you are looking for solutions related to this brand, contact Socrate’s technical team: we will help you select and integrate the technologies best suited to your needs.
Selected MSA & GM products
Some of the main MSA & GM solutions available through Socrate:
Brand new technology, with FM-approved performance for 22 flammable substances The FL5000 from MSA General Monitors® is a multispectral infrared (MSIR) flame detector. The FL5000 uses state-of-the-art infrared (IR) detectors and an advanced flame detection algorithm based on sophisticated leak detection technology (ANN, Artificial Neural Network) to provide a system with high immunity to false alarms caused by lightning, reflected sunlight, arc welding, hot objects, and other sources of radiation. Thanks to their mechanical and electrical characteristics, they can be installed in “extreme” environments such as chemical plants, platforms, refineries, and many others.
Main mechanical/electrical characteristics:
- Power supply: 20-32 Vdc
- Housing: Powder-coated 316 stainless steel, red
- Long detection distance, up to 95 m
- Communication interfaces: 4–20 mA output signal, relay, HART 7 communication, and RS485 serial communication port
- Spectrum: 2-5 microns (IR)
- Response time: 10 sec
- Maximum field of view: ± 45° at 34 m; ±30° at 64 m; ±15° at 95 m
- Certifications: CSA, FM, ATEX, IECEx, UAE, UKCA;
- FM, ULC, and EN 54-10 performance approvals
- HART 7 registered. SIL 2/3
- Stainless steel mounting bracket
- Cable entry: 2 × 3/4” NPT
- North American certifications
- Class I, Div. 1, Groups B, C and D T4
- Class II/III, Div. 1/2, Groups E, F and G;
- Class I, Div. 2, Groups A, B, C and D T4
- (-40 °C ≤ Ta ≤ +80 °C)
- Type 6P, IP66/67
- CL I, Zn 1, AEx db IIC T4 Gb
- Zn 21, AEx tb IIIC T135C Db
- Ex db IIC T4 Gb
- Ex tb IIIC T135C Db
- -55 °C ≤ Ta ≤ +80 °C
- ATEX/UKCA/IECEX certifications
- Ex db IIC T4 Gb,
- Ex tb IIIC T135C Db,
- -55 °C ≤ Ta ≤ +80 °C, IP66/67
- Protection rating: IP66/67
General Monitor FL4000H advanced multispectral flame detectors are designed for high immunity to false alarms, with the largest field of view. Thanks to their mechanical and electrical characteristics, they can be installed in “extreme” environments such as chemical plants, platforms, refineries, and many others.
Main mechanical/electrical characteristics:- Power supply: 20-36 Vdc
- Housing: 316 stainless steel
- Communication interfaces: 4–20 mA output signal, relay (pre-alarm, alarm, and fault), HART 6 communication, and dual serial communication port
- Spectrum: 2-5 microns (IR)
- Response time: ≤10 sec
- Maximum field of view: 100° at 30 m; 90° at 64 m
- Certifications: CSA, FM, ATEX, IECEx, ULC, EN54-10, MED, DNV-GL, VNIIPO, GOST, Inmetro, CE
- SIL 3 compatibility (FM)
- Stainless steel mounting bracket
- Cable entry: 2 × 3/4” NPT
- Classification:
- Class I, Division 1, Groups b, C, D
- Class II, Division 1, Groups E, F, G
- Class III, Type 6P
- Ex d IIC T5 Gb
- Ex tb IIIC, T100 °C Db,
- Protection rating: IP66/67
The performance of the FL500 UV/IR Flame Detector has been approved by Factory Mutual (FM) for hydrocarbon fires. Every two minutes, the integrated self-check function with continuous optical path monitoring performs an optical and electrical check to ensure that the optical path is clear and that the electronic circuits are working properly.
Main mechanical/electrical characteristics:
- Power supply: 20-36 Vdc
- Housing: 316 stainless steel
- Communication interfaces: 4–20 mA output signal, relay (pre-alarm, alarm, and fault), HART 7 communication, and Modbus communication port
- Spectrum 4.35 microns (IR) and 185 to 260 nm (UV)
- Response time ≤3 sec
- Maximum field of view: 130° conical
- Fuels: hydrocarbons (Butane, Ethane, Heptane, Methane, Methanol, Propane
- Certifications: CSA, FM, ATEX, IECEx, Inmetro, CE
- SIL 3 compatibility
- Stainless steel mounting bracket
- Cable entry: 2 × 3/4” NPT or 2 x M25
- Classification:
- Class I, Division 1, Groups B, C, D
- Class II, Div. 1, Groups E, F, G
- Class III, Type 6P
- Ex db IIC T5 Gb
- Ex tb IIIC T100 °C Db II 2 G D
- Protection rating: IP66/67
The performance of the FL500-H2 UV/IR Flame Detector has been approved by Factory Mutual (FM) for hydrogen fires. Every two minutes, the integrated self-check function with continuous optical path monitoring performs an optical and electrical check to ensure that the optical path is clear and that the electronic circuits are working properly.
Main mechanical/electrical characteristics:
- Power supply: 20-30 Vdc
- Housing: 316 stainless steel
- Communication interfaces: 4–20 mA output signal, relay (pre-alarm, alarm, and fault), HART 7 communication, and Modbus communication port
- Spectrum: 2–95 microns (IR) and 185 to 260 nm (UV)
- Response time ≤3 sec
- Maximum field of view: 130° conical
- Fuels: hydrogen
- Certifications: CSA, FM, ATEX, IECEx, Inmetro, CE
- SIL 3 compatibility
- Stainless steel mounting bracket
- Cable entry: 2 × 3/4” NPT or 2 x M25
- Classification:
- Class I, Division 1, Groups B, C, D
- Class II, Div. 1, Groups E, F, G
- Class III, Type 6P Ex db IIC T5 Gb
- Ex tb IIIC T100 °C Db II 2 G D
- Protection rating: IP66/67
- OBSERVER-i is the world's first ultrasonic gas leak detector equipped with ANN (Artificial Neural Network) real-time broadband acoustic sound processing technology.
- The ANN algorithm has been “trained” with these recordings to automatically distinguish between unwanted acoustic background noise and dangerous gas leaks.
- Innovative leak detection solutions that promote hydrogen safety
- Detects gas leaks starting at a pressure of 2 BAR (29 psi). Very small gas leaks can be detected quickly
- Approvals Classification: ATEX- IECEX / CSA / FM-CSA
- AISI 316L stainless steel housing
- Outputs: 4-20 mA / Hart and Modbus RTU
- Minimum detected acoustic frequency: 12 kHz
- Self-test: performed every 15 minutes
- Continuous monitoring of toxic gases, combustible gases, and oxygen deficiency using catalytic or electrochemical technologies
- Works with a wide range of toxic and combustible gases
- 4-20mA / relay output
- Hart optional
- ATEX
- SIL 2
- Continuous monitoring of combustible gases with IR technology
- Works with a wide range of toxic gases
- 4-20mA / relay output
- Hart optional
- ATEX
- SIL 2
-
Reduction in operating costs of over 80%
-
Detection of toxic and combustible gases:
• Methane
• Ethylene
• Ammonia
• CO2
• H2S
• Hydrochloric acid
• Gas Mix (CH₄+H₂S)
-
Gas detection up to 200 Mt depending on the type of gas to be detected
-
Maximum operating capacity during fog and rain: optimized wavelength selection minimizes interference from fog, rain, snow, and steam. Fog-immune
-
Outputs: 4-20 mA / Hart and Modbus RTU
-
ATEX
-
SIL2
-
System self-test to verify the correct functioning of all devices
- Industry-leading speed and response: T90 ≤ 3 seconds even with splash guard installed
- No routine calibration required, reducing maintenance costs
- Multiple communication outputs provide comprehensive status and control capability in the control room
- Heated optics eliminate condensation
- Dirty optics indication discriminates between a true fault and the need for cleaning
- Fast calibration times reduce the amount of calibration gas required, reducing maintenance time and costs.
- Approvals: ATEx, IECEx, MED, DNV gL, CE, FM 6310, 6320, and CSA 22.2 No. 152 EN 60079-29-1 Approved performance HART registration, FM certification according to IEC 61508
- 4-20mA output
- Suitable for SIL 3.
- Hart
- Sensitive to small (ppm.meter) and large (LEL.meter) gas leaks thanks to dual detection range
- Path lengths: 5-30 m, 20-100 m, 80-150 m
- Ideal for use in harsh environments (-55°C)
- Single detection beam improves accuracy and reduces drift
- Continuous self-monitoring for fail-safe operation
- Multiple communication outputs (HART, Modbus, AMS support) provide comprehensive status and control functionality in the control room
- Unified display simplifies operation
- Automatic gain control compensates for dirty optics, rain, and fog
- Approvals: CSA, FM, ATEX, IECEx, DNV-GL, INMETRO, EAC, CE
- Suitable for SIL 3
- HART
- Housing: 316 stainless steel
- Automatic self-checking 4 times a day
- Wide operating temperature range for extreme environments (from -55°C to +75°C)
- Bluetooth wireless technology allows your mobile device to act as an HMI screen and controller
- SafeSwap allows safe and quick replacement of XCell sensors without turning off the instrument
- GM MOS sphere (passive sensor)
- Dual sensors with individual analog outputs available
- 1 transmitter, double detection power
- Same footprint and wiring as the S4000 series, simplifying retrofits using existing conduits and wiring
- State-of-the-art sensor technology
- Sensor type for toxic and oxygenated gases: Catalytic pearls (XCell Oxygen) and Echem for toxic gases and PASSIVE MOS sensors for H2S
- Approvals: CSA, FM*, ATEX, IECEx, INMETRO, ABS, DNV-GL Marine, CE mark.
- Suitable for SIL 2.
- Hart
- PrimaX P: point gas sensor for detecting toxic gases, combustible gases, and oxygen
- Catalytic sensor for detecting combustible gases.
- Electrochemical sensor for detecting toxic gases and oxygen
- Communication interfaces 4–20 mA output signal and 2 optional relays. HART digital communication is available as an option for configuration, calibration, and diagnostics
- Plug-in sensor replacement The plug-in connector design allows the sensor to be replaced quickly and easily, facilitating routine maintenance
- Easy to use The large display with clear text messages provides information at a glance, while the LEDs (First X P) clearly indicate the status of the detector.
- Easy to calibrate Calibration is easy using the built-in test head
- Certifications: CSA, ATEX, IECEx, UL, CMC, CCCF, EAC, INMETRO, HART registered, BG RCI.
- SIL 2 available.
- Hart
- Automatic self-checking 4 times a day
- Organic LED (OLED) display and bright status LEDs for exceptional visibility
- No tools required to navigate the menu, no magnet
- Bluetooth wireless technology allows mobile devices to act as an HMI screen and controller. The X/S Controller app is designed to offer high safety standards and provide real-time information on the user's mobile device.
- Dual sensor management
- SafeSwap technology allows quick and safe replacement of XCell sensors without turning off the instrument.
- Dual detection capability doubles effectiveness with the same footprint as a single transmitter.
- Advanced technology
- Fuel sensors: catalytic (XCell) & infrared (XIR Plus)
- Sensors for toxicity & oxygen: catalytic (XCell Oxygen) & electrochemical for toxic gases
- Certifications: CSA, FM*, ATEX, IECEx, INMETRO, DNV-GL Marine, CE Marking. SIL 2 available. SIL 2 available.
- >Hart
- Designed for detecting flammable vapors or gases
- Poison-resistant (PRP) and high-temperature (HT) versions
- Suitable for use in safety systems (ATEX 2014/34/EU)
- 3- or 5-wire connection
- Stainless steel sensor body
- Fast response time
- Excellent performance-to-cost ratio
- Integrated safety level – SIL 2
Socrate chose MSA because
Global leadership
MSA is recognized worldwide for its leadership in the manufacture and supply of high-quality safety products.
Commitment to safety
A long and prestigious history of commitment to safety, demonstrating its reliability over time.
Advanced technologies
MSA products integrate advanced technologies to provide effective protection from dangerous or potentially lethal situations, ensuring peace of mind for users.
Wide range of sectors served
MSA products are used in a wide range of industries, providing reliable protection in multiple operating environments.
Complete range of products
MSA offers a comprehensive range of safety products, meeting a wide range of needs.
Reliability
Working with MSA gives Socrate the peace of mind of providing its customers with reliable, superior safety solutions, helping to ensure a safe and secure working environment.
You will be contacted within 24 hours.
We are ready to respond to your needs
Contact